HD Digital Signal Meter Spacetronik STC-33 Combo – User manual
17 / 23
7.
DVB-C
User can measure DVB-C live signal in this submenu. There
are total six submenus: Cable Measure, Auto scan, RF
channel list, Tilt , Spectrum chart and Trunk voltage.
7.1
C
ABLE MEASURE
User can read SNR, BER, PER, level, strength and quality of
the live signal.
:
The lock status. The signal is locking if the icon is green otherwise the
color of the icon is red.
C18:
The frequency channel name.
DVB C:
The cable system. The values are DVB C ,DVB C2 and MCNS. Press [
/
]
to switch them.
FREQ:
The current frequency. Press [
/
] to change the value or press [OK] to
edit it.
SYM:
The symbol rate of the current signal. The device will get it
automatically once the signal is locking.
SNR:
The signal noise rate value of the live signal.
BER:
The bit error rate of the live signal.
PER:
The packet error rate of the live signal.
LEVEL:
The power level value of the live signal.
Str:
The strength value of the connected signal.
Qlt:
The quality value of the connected signal.
7.2
A
UTO
S
CAN
The meter will scan all the saved frequencies and show the
lock status one by one and will then return to the main
menu once scanning is finished. Press [MENU] to abort a
scan in progress and return to the main menu.
7.3
RF
C
HANNEL
L
IST
