Page 17
Space Scooter
®
F.A.Q. (frequently asked questions)
The Space Scooter
®
does not unfold.
Inspect your Space Scooter® carefully. The rear brake maybe locking
the back wheel into place. If this is the case, simply loosen the nut with
a size 8 wrench to provide some slack, then refasten the nut.
The grip of the grip sticker on the deck diminishes
If you need additional assistance, please contact us by e-mail ([email protected]) with
clear description of the problem. Or when not available contact us by e-mail
([email protected]) with a clear description of the problem.
HOW TO: FOR REPLACING THE GRIP STICKER.
a)
Remove the existing sticker. You can easily peel off the sticker with your nail. Gently
pull off the sticker.
b)
Make sure the tray shelf is clean. (defatted)
c)
Peel off the new sticker from its back-side. Make sure to start at the square end and
only peel the first few centimeters. (This is applied at the front side of the Space
Scooter®)
d)
Place the square end of the sticker straight onto the tray plank. Pull the sticker's
back-side off bit by bit whilst rubbing the sticker onto the tray. Make sure to create
no air pockets while applying.
The chain skips or runs next to the gears(flywheel).
HOW TO: REPLACE THE CHAINSPRING.
a)
Lift the chain from the gears (go to the workshop manual available on
www.spacescooter.eu
to find additional information on how to do this)
b)
Loosen the inbus that holds the spring on the front.
c)
Loosen the inbus that holds the other side of the spring.
d)
Insert the new spring in reverse order.
The Space Scooter
®
makes strange noises.
There could be a few reasons why your Space Scooter® is making noises. Below are a few
reasons why this could be happening, and how to fix it.
(a)
Treat the chain with a dry lubrication, which can be purchased at any bike or
hardware store.
We do not recommend using WD40 or a silicone spray, as this will
