Page 14
Check and Adjust
Check collar clamp
Using a 5 mm Allen wrench, check that the
collar clamp bolt is tightened securely as it
may have loosen during shipping.
WARNING:
Failure to properly secure the
collar clamp may cause risk of injury or
death.
Check wheels and bearings
Periodically inspect the wheels for wear and tear, the axle
for proper tightness and bearings for side-to-side play and
loose parts.
Check quick release
Check all quick-releases before riding and
make sure that they are closed and tightened.
Adjust quick-release as follows:
1.
Open handle of quick-release.
2.
Adjust nut of quick release.
3.
Close handle of quick release.
If it is not suitable, do it again.
