9
[R1] Rail
[R1] Rail
[R1] Rail
[A1] Arm
[R2] Rail joining
Insert rails into arm
Use rail stands like railway ties
Install the arms in an inclined position to each other to create steep sections
The distance between the arms should be between 8 to 10cm.
When the distance is larger, rail stands [A6] have to be installed
8
15
17
18
19
16
Installation of the rails
Insert the rails into the arms
(fg. 15+16)
Rail joining (fg. 17)
Adjust and connect the rails.
Insert the rail joinings [R2] into
the holes at the center of the
rails (fg. 17)
Information about rail stands
(fg. 18)
The distance between the
arms shouldbe between 8 to
10cm to ensure best stability.
When the distance is larger,
rail stands [A6] have to be
installed
Attach rail stands in steep
sections and elevator entry/
exit points to ensure best
stability of the rails
Steep sections (fg. 19)
Install the arms in an inclined
position to each other to
create steep sections, so
that the steel balls can run
smoothly (fg. 19)
Assembly of the rails