8
Rail connection marks
Release arm tube [A3] before mounting the rails
Letters and numbers (e.g. D-2) show the correct
positions of shafts and arms described on page 6-7
Loop (enlarged picture)
From seesaw exit (start) to elevator entry:
Install 2 x 26cm rails (fg. 13-1)
Insert rail stand at the end of
the rail to ensure best seesaw
stability
Simply cut the rails to the desiredlength (see page 9: Rail joining)
Rail assembly steps
This ball roller coaster provides 2 elevator exits (start)
and 2 elevator entries (end). Please note fg. 12+13
and the pictures on page 2+3 during assembly
Install rail stands together with the rails (page 9)
Due to the long distance, the installation of this
section is divided into 2 assembly steps (please
refer to fg. 12-1 + 12-2)
Fig. 12-1 and 12-2 show the upper and lower track layout
Fig. 12-1: From elevator exit (start) to the loop entry
Fig. 12-2: From loop entry to lower elevator entry
Install 2 x 245cm rails for the complete distance
in fg. 12-1 + 12-2
The enlarged picture provides further information
regarding loop installation
From elevator exit (start) to seesaw entry: Install 2 x
105cm rails (fg. 13-2)
Fig. 13-1 and 13-2 show the upper and lower track layout
Note:Fig. 27 on page 11 provides further assistance if
the steelballs do not run smoothly into the elevator
7
12-1
12-2
13-1
14
13-2
Seesaw (enlarged view)
Correct seesaw installation
Assembly of the rails
Don´t cut
Don´t cut