23
Figure 31 Device Interface
Settings->Device:
Basic parameters of “Device” interface include:
Ø
Device IP: It refers to static configuration of device’s current IP address. Such
address can be only modified in the form of 192.168.1.*. Please keep in mind
after modification, and modification will take effect when restarted.
Ø
GID pull-down menu: It refers to USIM card group identifier number.
GID1~GID3 can be selected on the GID pull-down menu respectively, and
corresponding GID values can be inputted in the right input box.
l
GID1: It refers to one document of USIM card restricted by the service
provider. Only the USIM card provided by the same service provider can
be used to restrict the FleetOne terminal. The number is 65535 by default,
and then one USIM card provided by any service provider can be used.
l
GID2: It refers to one document of USIM card restricted by the service
distributor. Only the USIM card provided by the same service distributor
can be used to restrict the FleetOne terminal. The number is 65535 by
default, and then one USIM card provided by any service distributor can
be used.
l
GID3: It refers to one USIM card restricted by a product. The basic
document GID3 (0
×
8F0D) of USIM card includes one 0
×
0100 or more
values. Such value(s) should be assigned by Inmarsat, to limit the USIM
card to being only used on the specified equipment. If such limited USIM
card is used at the FleetOne terminal, EFGID3 data retained in the USIM
card will be retained in FEM. The USIM card restricted by a product will
not be allowed to be used on any other products.
Ø
Restart button: It is used to restart one device.
Ø
Factory setting reset: Click to reset the factory settings.
