11
Ø
After successful login, it will enter the main interface of Web console, as
shown in the figure below;
Figure8 Web Console Main Interface
5.2
Status Bar
The status bar is on the left side of the main interface and contains the following
information:
Ø
Signal Strength
Satellite signal strength: In the process of calibration, ensure that the device is not
shielded, and the signal strength should be good enough (only when the signal
strength is greater than 46dB can enter the network).
Ø
Network Status
Network entry status: Only when the status is "home", it indicates that the network
has been normally accessed. After the network is accessed, SMS, BGAN IP voice
communication, data transmission and so on functions can be used.
Ø
Spot Beam
It indicates the beam number of the current terminal device.
Ø
GPS
It displays information such as the current latitude and longitude position, speed,
and UTC time.
Ø
Terminal
This status bar displays information such as the device battery status, remaining
battery capacity and device temperature.
