3A
... continued
3:
PLACE BASE OF
NICHE ADAPTOR ONTO
NICHE TAB
4:
ENSURE THE ‘HOOK’ TAB AT THE
BASE OF THE NICHE ADAPTOR SITS
NEATLY & FIRMLY OVER THE NICHE TAB
If the ‘Hook’ Tab does not sit neatly & firmly over
the niche tab, then install the additional ‘ANCHOR’,
which is a removable part on the ‘HOOK’ Tab.
The ‘ANCHOR’ provides a firmer attachment.
To install the ‘ANCHOR’:
A: cut the ‘ANCHOR’ off the ‘HOOK’ Tab
B: turn it over and insert into back of ‘HOOK’ Tab.
6:
USE A SCREWDRIVER TO
FIX NICHE ADAPTOR TO
NICHE (CAPTIVE SCREW
INCLUDED)
7:
TIGHTEN LOWER ‘HOOK’ TAB SCREW TO ENSURE A TIGHT FIT
8:
GO TO
SECTION C: CONNECT LUMINAIRE
3
6
4
5:
ALIGN THE SCREW
FITTINGS AT TOP
5
Inside view
Front view
Side view
Adjust height
as needed to
ensure a
secure fit
to niche
14
