Page 14
SP Controls, Inc.
Select Input (device to appear on the display)
Select Input (device to appear on the display)
Using the Input Select pull down menu, select down-arrow and the desired input. Once selec-
tion has been made the image from that device will appear on the display and audio from that
device will be heard on the display and the RCA connectors.
Turn Display On / Off
Turn Display On / Off
Using your mouse, select “On” to turn the display on and “Off” to turn off the display. The indi-
cator to the right (Off / On) always shows the current status of the Display. This feature requires
CEC display control to be active and that the display itself has CEC capabilities.
Change Image Resolution
Change Image Resolution
To change the resolution, we advise the input to use the preferred resolution of the display
using a data structure called EDID (Extended Display Identification Data). The user can change
this setting by selecting the EDID Resolution setting as needed. To do this, select the small down
arrow to the right to see the available resolutions of which to choose.
The system will require a reset for the SP-SW5100-VUHD and the input to recognize the new
resolution setting.
Volume Level
Volume Level
This feature only effects the audio level on the RCA pre-amp outputs. To adjust the audio level,
press on the Blue Dot associated with the Volume as show below. Click and drag to the desired
level. The level is indicated next to the mouse as the volume is adjusted.