Page 13
SP-SW1900-HD Users Guide
EDID Table Settings
EDID Table Settings
RES Value
Resolution / Behavior
0
Pass Through Mode
1
1080p @ 60Hz
2
720p @ 60Hz
3
1920 x 1200 @ 60Hz
4
1600 x 1200 @ 60Hz
5
1280 x 1024 @ 60Hz
6
1280 x 768 @ 60Hz
7
1024 x 768 @ 60Hz
Here is an example:
SW1900-HD by Presentation Switchers
Firmware Revision 1.0
$ RES 2
RES 2
In the example above, the EDID is modified to indicate the preferred resolution of this display
is 720p. The SW1900-HD will send out a refresh request to all inputs to read the latest display
information. Unless resolutions have been overridden by the end user, input devices will
automatically change their output resolution to match the new resolution.
To view the current resolution setting, type “RES” and a carriage return.
Auto-Switch On / Off
Auto-Switch On / Off
By default, auto-switch is always enabled. Here is how to control this feature:
SW1900-HD by Presentation Switchers
Firmware Revision 1.0
$ ASW 0
ASW 0
By typing “ASW 0”, the auto-switching feature is disabled. From this point, the only way to make
a switch is by using the SW command. “ASW 1” will enable the feature.
Type “ASW” and carriage return to view the current state of the auto-switch feature.
