BIOS Setup Utility
SY-P4IS2
52
3-1 SOYO COMBO SETUP
This Motherboard does not use any hardware jumpers to set the CPU
frequency. Instead, CPU settings are software configurable with the BIOS
[SOYO COMBO SETUP].
After the hardware installation is complete, turn the power switch on, then
press the <DEL> key during the system diagnostic checks to enter the
Award BIOS Setup program. The CMOS SETUP UTILITY will display
on screen. Then, select the [SOYO COMBO SETUP] option from the
main menu and press the <Enter> key.
CMOS Setup Utility – Copyright ( C ) 1984-2001 Award Software
SOYO COMBO Feature
CPU Frequency Select
Auto
Frequency 1MHz Stepping
100MHz
Item Help
CPU Clock Ratio
X 17
Spread Spectrum
Disabled
System Performance
Normal
Quick Power On Self Test
Enabled
CPU Vcore Select
Default
C.I.H. 4-WAY Protection
Enabled
Memory Frequency For
Auto
DRAM Timing Selectable
By SPD
x CAS Latency Time
2
x Active to Precharge Delay
7
x DRAM RAS# to CAS# Delay
3
x DRAM RAS# Precharge
3
First Boot Device
Floppy
Second Boot Device
CDROM
Third Boot Device
LS120
Boot Other Device
Enabled
AC97 Audio
Auto
AC97 Modem
Auto
Menu Level
4
áâà
Move Enter : Select
+ / - / PU / PD : Value F10 : Save ESC : Exit F1: General Help
F5 : Previous Values
F6 : Fail – Safe Defaults
F7 : Optimized Defaults
The [SOYO COMBO SETUP] menu combines the main parameters that
you need to configure, all in one menu, for a quick setup in BIOS.
Summary of Contents for SY-P4IS2
Page 93: ...89 ...
