SOYO SY-P4I845GV/PEISA Plus Quick Start Guide
29
3.10 PnP/PCI Configurations
This category allows you to control attached PCI devices to avoid hardware
resource conflicts.
Phoenix – AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Item Help
PNP OS Installed
Reset Configuration Data
Resources Controlled By
x IRQ Resources
x DMA Resources
PCI/VGA Palette Snoop
Assign IRQ For VGA
Assign IRQ For USB
PCI Latency Timer(CLK)
INT Pin 1 Assignment
INT Pin 2 Assignment
INT Pin 3 Assignment
INT Pin 4 Assignment
INT Pin 5 Assignment
INT Pin 6 Assignment
INT Pin 7 Assignment
INT Pin 8 Assignment
No
Disabled
Auto (ESCD)
Press Enter
Press Enter
Disabled
Enabled
Enabled
32
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Menu Level
↑
↓→
←
:Move Enter:Select +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults
ITEM
FUNCTION
PNP OS Installed
If you are using a Plug & Play capable OS,
choose “Yes” to enable PNP support. Choose
“No” for non-PNP OS and manual configuration
of PNP devices.
Reset Configuration
When you encounter hardware conflicts after
installing a new device to the system, set this
item to “Enabled” to reset Extended System
Configuration Data (ESCD) when you exit
CMOS Setup Utility.
Resources Controlled by
•
IRQ Resources
•
DMA Resources
Allows you to manually allocate IRQ/DMA
resource when encountering hardware errors
unsolvable by automatic configuration.
PCI/VGA Palette Snoop
Default is recommended.
Assign IRQ For VGA
Allows you to assign a specific IRQ address for
VGA devices.
Assign IRQ For USB
Allows you to assign a specific IRQ address for
onboard USB.