SOYO SY-P4I845GV/PEISA Plus Quick Start Guide
23
ITEM
FUNCTION
CPU Feature
Adjust CPU settings to meet some old system
requirement such as NT4.0.
Virus Warning
If enabled, a warning will pop up when hard
drive boot sector is being written, a virus
protection mechanism to avoid boot sector
infection.
CPU L1 & L2 Cache
If enabled, CPU L1 & L2 cache will be
utilized to boost system performance.
CPU L2 Cache ECC
Checking
If enabled, CPU L2 cache will be checked for
errors to ensure data integrity.
Quick Power On Self Test
If enabled, the system will skip some POST
tests to reduce time needed to boot up.
First / Second / Third Boot
Device
Press [Enter], [Page Up]/[Page Down], or
[+]/[-] to arrange the boot sequence of certain
device among multiple boot device options.
Boot Other Device
In the case of no boot device is specified or
failure to detect any boot device, system will
try to boot from other available devices if this
function is enabled.
Boot Up Floppy Seek
Boot Up NumLock Status
If enabled, the floppy drive will be sought and
NumLock activated when booting up.
Gate A20 Option
Default is recommended.
Typematic Rate Setting
When enabled, the speed of keystroke can be
adjusted.
Security Option
Select the timing when the password is
required to enter the CMOS Setup Utility or to
boot the system.
APIC Mode
Default is recommended.
MPS Version Control For OS
Default is recommended.
OS Select For DRAM > 64MB
Select OS2 only when you are running OS/2
OS. The default setting is Non-OS2
HDD S.M.A.R.T. Capability
Allow hard drive to perform self test as a
precaution to avoid sudden crash. This
function must be supported by hard drive and
will reduce hard drive performance if enabled.
Report No FDD For WIN 95
Default is recommended.
EPA LOGO SELECT
Small Logo (EPA) Show
Enable/disable the display of SOYO logo
during POST.