manualshive.com logo in svg

SOYO SY-6VZA, User Manual, Page: 66 / 74

Share
Download
SOYO SY-6VZA User Manual Download Page 66

Drivers Installation

SY-6VZA

63

Step 2. Install Drivers and Utilities

The following describes the best way of installing Windows
95 or Windows 98 on your SY-6VZA Motherboard:

Ø

 The following BIOS default settings should not be

changed:

1. The ‘ OnChip USB Controller’  item under ‘ Chipset features Setup’

is set to enabled.

2. The ‘ USB Assigned IRQ’  item under ‘ PnP/PCI Configuration is set

to enabled.

You MUST have these two items enabled for Windows
95/98 to run properly on your system.

Ø

 Install Windows 95/98

Ø

 After installation of windows, you will need to install

theVIA drivers. Follow the instruction below.

Click the Enter SOYO CD button to display the list of drivers that

can be installed on your Motherboard. The start-up program

displays the drivers available for the SY-6VZA and the Windows

version you use. For Windows 95 four drivers will be listed (see

‘ Driver Installation Menu’  below), for Windows 98 three drivers will

be listed (the ACPI drivers will be left out).

Summary of Contents for SY-6VZA











































































Reviews:

No comments