SOYO SY-6VZA, User Manual, Page: 58 / 74

BIOS Setup Utility SY-6VZA
55
3-8.6 Onboard Parallel Ports
Onboard
Parallel Ports
Setting Description Note
378H/IRQ7 Default
3BCH/IRQ7
Onboard
Parallel Port
278H/IRQ5
Choose the printer I/O
address.
ECP/EPP Default
SPP
ECP
Parallel Port
Mode
EPP/SPP
The mode depends on your
external device that connects
to this port.
If [Parallel Port Mode] is set to [ECP] mode
3 Choose DMA3 Default ECP Mode
use DMA
1 Choose DMA1
3-8.7 Other Control Options
Other Control
Options
Setting Description Note
On The system will switch on
when power comes back after
a power failure.
Off The system will remain off
when power comes back after
a power failure. Default
PWRON After
PWR-Fail
Former-sts The system will return to the
state it was in before the
power failure when power
returns. (i.e: If the system was
on, it will switch on again, if it
was off, it will remain off)