Hardware Setup
SY-6VZA
25
3. Select [SOYO COMBO SETUP]
Move the cursor to the [CPU Frequency] field to set the CPU
frequency, as shown in the following display.
Available [CPU Frequency] settings on your SY-6VZA Motherboard
are detailed in the following table. You are then required to fill in the
next two consecutive fields: (1) CPU Speed, and (2) the Host Clock
(CPU/PCI).
CPU Frequency
300AMHz (66 x 4.5)
333MHz (66 x 5.0)
366MHz (66 x 5.5)
400MHz (66 x 6.0)
433MHz (66 x 6.5)
Select the working frequency of your
Celeron
TM
processor among these preset
values.
Note:
Mark the checkbox that
corresponds to the working frequency of
your Celeron
TM
processor in case the
CMOS configuration should be lost.
Note: if you use Bus Frequencies of 75 MHz, make sure that
your PCI cards can cope with the higher PCI clock.