26
BIOS Setup
On-chip Primary PCI
IDE
On-chip Secondary PCI
IDE
Enabled: Use the on-board IDE (default)
Disabled: Turn off the on-board IDE
PCI Slot IDE 2nd
Channel
Choose Enabled (default) or Disabled.
When Enabled is set, IRQ15 is dedicated
for secondary IDE use. When Disabled is
set, IRQ15 is released for other devices.
Onboard FDC Controller
Enabled: Use the on-board floppy
controller (default).
Disabled: Turn off the on-board floppy
controller.
Onboard Serial Port 1
Choose 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4,
2E8/IRQ3, Auto, or Disabled to set serial
port 1Õs I/O address. Do no set port 1 & 2
to the same value.
Onboard Serial Port 2
Choose 3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4,
2E8/IRQ3, Auto, or Disabled to set serial
port 2Õs I/O address. DonÕt set port 1 & 2
to the same value.
UR2 Mode
Normal: Use standard UART mode
(default).
IrDA:
Use UART with IrDA infrared
function enable (It could
transfer data up to 115K baud
rate.)
ASKIR: Use UART with ASK infrared
function enable (It could
transfer data up to 19.2K baud
rate.)