Hardware Setup
17
AT PWR (CN1)– AT Power Supply Connectors
The mainboard requires a power supply with at least 200 watts and a
Òpower goodÓ signal. AT PW has two 6-pin male header connectors.
Plug the dual connectors from the power directly onto the board
connector while making sure the black leads are in the center.
IDE1/IDE2 – Primary/Secondary IDE Device Connectors
Attach the IDE device cables to these connectors.
ATX PWR (P1)– ATX Power Supply Connector
The motherboard provides an ATX power supply connector. It is a
twenty-pin male header connector. Plug the connector from the power
directly onto the board connector while making sure the pin1 is in its
position.
