BMK-8 U /
BMK-12 W
32
5.3.5
Special function "Setting the feeder operation"
This special function serves as a help for setting the feeder operation when the stud welder is
equipped with an optional automatic set.
For calling this special function, please proceed as follows:
• Simultaneously press "arrow down" and "arrow left" keys and keep them pressed.
• Switch stud welder on with main switch.
• Stop pressing function keys.
Display when setting feeder type "BMS"
or:
Display when setting feeder type "BMK"
By using the function keys "arrow left" or "arrow r
ight" you can move the slider in the feeder’s stud
escapement to the left or right end position and thereby check the setting. During this process, the
operating states of possibly existing sensors are displayed as "on" or "off". For further information,
please refer to the operating instructions of your universal feeder.
Basic setting for BMK feeder
When using a BMK feeder, we recommend the following basic setting. Please note that these values
will be deleted when using the "RESET function" e.g. in troubleshooting.