Step 7: Click “Get” to get default Local IP Address, Gateway, Netmask and TCP Port.
Step 8: Change new address and parameters then click “write”.
Step 9: If AR-727CM connects to soyal controller, please switch DIP Switch position
to OFF, OFF, ON, OFF to RS-485 RUN Mode.
Remark:
(1) How to know PC’s IP Address? (Win98)
Start
→
execute
→
enter “winipcfg”.
(2) How to know PC’s IP Address? (Win2000)
Start
→
Programs
→
Accessories
→
Command Prompt
→
C:\> ipconfig
(3) Please see detailed parameter in next page:
Setting Value Notes
Necessity
Local IP Address 192.168.001
.127
Defines own IP Address of the AR-727CM
Required
Local Gateway IP
Address
192.168.001
.254
Defines the IP Address of the default
gateway
Required
Local Subnet
Mask
255.255.255
.000
Defines the IP Address range for the local
network segment
Required
TCP Port
1621
The TCP port that other devices must use to
contact this device. To avoid conflicts with
standard TCP ports.
Required
MAC Address
00.E0.4C.00
.00.50
The MAC (Media Access Control) address is
a unique identifier set at the factory.
-
Force Transmit
time
5
Forces AR-727CM device’s TCP/IP protocol
software to try to pack serial data received
during the specified time into the same data
frame.
Optional
Force Transmit
Bytes
32
Defines the amount of data in the serial,
Ethernet buffer at which the break condition
will be generated and the contents of buffer
will be sent out via the Ethernet port.
Optional
Lock Remote IP
Address
-
Allows contact with only the specified remote
IP address.
Optional
Lock Serial Port
(Free Run or
Freeze Over)
-
To avoid the hacker use this IP to intercept
data when Remote IP Address doesn’t
receive data.
Optional
Setup Password none
Console password
Optional
Serial Port Speed 9600
Changes current baud rate of the
AR-727CM’s serial port (from 2400bps to
57600bps).
Required
TCP Auto
Disconnect Time
(Second)
60
This device automatically closes TCP
connection if there is no TCP activity for the
given time.
Optional
Serial Port
Hardware
Handshaking
(RTS/CTS)
-
An exchange of signal over specific wires
which each device indicates its readiness to
send or receive data.
Optional
DHCP
-
Selecting the enable option allows DHCP to
automatically assign the AR-727CM’s IP
address.
Optional
7
