29
MAINTENANCE AND STORAGE
Make sure that the tool has been thoroughly cleaned
before storing it in a clean, dry and safe place, out of
the reach of children.
1. Switch the product 'OFF' and disconnect it from the power
supply before transporting it anywhere.
2. Always carry the product on its gripping surfaces.
3. Protect the product from any heavy impact or strong
vibrations which may occur during transportation in
vehicles.
4. Secure the product to prevent it from slipping or falling
over.
11. POLISHING WITH THE FELT WHEEL
After assembling the felt wheel to the screw drill (SEE FIG.
E), it can be used to polish plastics, metals, steels, jewellery
and small parts with a polishing compound, which will give a
high lustre to the surfaces of the materials. For best results,
polishing accessories should be used at speeds not greater
than half speed.
9. HOLDING THE TOOL
For milling or engraving, hold the tool like a pen. Take care not
to cover the ventilation slots.
The tool will get warm during normal operation.
Observe the rated operating time.
10. USING THE DRILLS
The HSS twist drills are used to cut through all types of steels
and steel composites.
