1 x spanner
23
1pc spanner
OPERATION
NOTE: Before using the tool, read the
instruction book carefully.
Intended Use
This tool is intended for grinding, polishing metal as well as for
cutting metal and drilling in metal and wood.
BEFORE PUTTING INTO OPERATION
1. CHARGING (SEE FIG. A)
NOTE:
a) Do not use any charger cable other than that specifically
provided for use with the tool.
b) If the tool is very hot, you must remove your
battery from the charger and allow time for the battery
to cool down before recharging.
c) The battery in your new tool is not charged when it leaves
the plant. Therefore it must be fully charged before using the
first time.
d) Please charge the battery to reach full or no less than half
charge before storage. If the tool will not be used for long
periods of time, charge the battery every 3-6 months.
Connect the type-C cable (8) with a suitable power charger(not
supplied) and put the other side into the charging socket (7).
The charging indicator (6) will turn red during charging.
The battery is fully charged as soon as the charging indicator (6)
turns green.
Then unplug the charger. Disconnect the charger cable from
the tool. The tool is ready to be used.
Note
：
When the battery is depleted, the tool will turn off
automatically. This will be a sudden stop as opposed to a gradual
slow down of the tool. Simply recharge the tool.
