11
n) Position the cord clear of the spinning
accessory.
If you lose control, the cord may be cut
or snagged and your hand or arm may be pulled into
the spinning accessory.
o) Never lay the power tool down until the
accessory has come to a complete stop.
The
spinning accessory may grab the surface and pull the
power tool out of your control.
p) After changing the bits or making any
adjustments, make sure the collet nut, chuck
or any other adjustment devices are securely
tightened.
Loose adjustment devices can
unexpectedly shift, causing loss of control; loose
rotating components will be violently thrown.
at your side.
Accidental contact with the spinning
accessory could snag your clothing, pulling the
accessory into your body.
r) Regularly clean the power tools air vents.
The
motors fan will draw the dust inside the housing
and excessive accumulation of powdered metal may
cause electrical hazards.
materials.
Sparks could ignite these materials.
coolants.
Using water or other liquid coolants may
result in electrocution or shock.
