11
Southworth Products
PalletPal 360 Manual
7. Grasp the spring by the second or third coil down from the top, compress the spring and
slide the top of the spring into the upper spring pocket.
Do not grasp the top coil of the spring or your hands/finger may be
crushed when sliding the spring into the pocket.
8. Verify the spring is properly seated in the upper spring
pocket. The top of the spring should be completely within
the pocket.
9. Remove the motion stabilizer pin. The spring should hold the platform elevated.
10. Press down on the platform until the two latches fall into place. The latches will fall in
behind the roller pins.