14
CAUTION:
Adjust stopper bolt when lift lowers too rapidly.
To maintain the platform at an intermediate point:
The platform stops when pumping up pedal is stopped.
When the lowering lever is released, the platform stops lowering and will maintain
the position.
Loading/Unloading
CAUTION:
Do not allow load to overhang the edge of the
platform. Do not load more than specified capacity.
Parking Lock
1. Parking brake (floor lock) must be actuated
during parking and lifting or lowering of the
platform.
WARNING:
Floor lock (parking brake) is fixed to prevent shoe from falling off during shipment. Do not actuate
as is. The following adjustment must be made as soon as the unit is assembled.
2. Adjustment of the shoe on the parking brake
Adjustment work must be done on flat surface.
Step on lock lever until it clicks actuating the brake.
Screw shoe down by rotating it in a clockwise direction so that it touches the floor.
Step on release lever to release the brake. Then rotate the show clockwise an
additional two turns to provide firm contact with the floor.
NOTE: By doing the above adjustment, shoe will compress by 1/8”, assuring firm contact
with the floor. If perfect braking is not achieved, repeat above adjustment.
CAUTION:
Make sure floor lock is set during lifting or parking.