background image

25

Southworth Products

Mortuary Lift Manual

11.  Warranty & Contact Information

Southworth Products Corp. warrants this product to be free from defects in material or 

workmanship for the duration of the warranty period. Warranty periods vary and begin on the date 

of shipment. For specific warranty information, contact Southworth Products with the machine’s 

serial number.
Any claim for breach of this warranty must be received in writing by Southworth within the 

warranty period. Warranties shall not cover failure or defective operation, caused by misuse, 

misapplication, negligence or accident, exceeding recommended capacities, or any alteration or 

repair of the item purchased which has not been authorized by Southworth. Except as set forth 

herein, Southworth makes no other warranties, express or implied, including THE WARRANTIES 

OF MERCHANTABILITY AND OF FITNESS FOR A PARTICULAR PURPOSE, all of which ARE 

HEREBY EXCLUDED.
Southworth’s obligations under any warranty or for any other damages which may arise under 

any sale, agreement, or contract, are limited to the replacement or repair of defective components 

at its factory or another location at Southworth’s discretion. This is buyer’s sole remedy under 

any such warranty, sale, agreement, or contract. Southworth will not be liable for consequential, 

incidental, exemplary, or punitive damages of any kind resulting from a breach of any warranty 

that it has provided or for breach of any term of any sale, agreement, or contract. Any warranty 

may be altered only in writing by Southworth.
Southworth meets the labeling requirements of California’s Proposition 65. Southworth makes 

no warranty or representation with respect to the compliance of any product with other State or 

local safety or product standard codes and any failure to comply with such codes shall not be 

considered a defect of material or workmanship under this warranty. Southworth shall not be liable 

for any direct or consequential damages arising out of such non-compliance.
All commodities, software, or technology purchased from Southworth are subject to the export 

and re-export control laws and regulations of the United States, including but not limited to the 

Export Administration Regulations (“EAR”) and Department of the Treasury Office of Foreign Asset 

Controls (“OFAC”) Regulations.  Southworth expects all distributors and customers to comply with 

these laws and regulations. Without limiting the foregoing, the distributor/customer cannot, without 

proper authorization from the applicable United States Government Agency, export, re-export, or 

transfer any commodity, software, or technology purchased from Southworth, either directly or 

indirectly, to any entity, country, or national of any country in breach of such laws and regulations. 

Furthermore, Southworth expects that the distributor/customer shall indemnify and hold harmless 

Southworth from and against any claim, proceeding, action, fine, loss, cost and damages arising 

out of or relating to any noncompliance with export control regulations by distributor/customer, and 

distributor/customer are expected to compensate Southworth for all losses and expenses resulting 

thereof, unless such noncompliance was clearly not caused by fault of the distributor/customer.

SOUTHWORTH PRODUCTS CORP. 

P.O. Box 1380, Portland, ME 04104-1380 

Telephone: 800-743-1000 • 207-878-0700 

Fax: 207-797-4734 

www.SouthworthProducts.com

Summary of Contents for CLL05-68


























Reviews: