8
OPERATING PROCEDURE (continued)
If it is necessary to move the unit with an
elevated load:
Make sure the area is clear of obstruc-
tions
Keep personnel away from the load
and behind the operator’s position.
Move the unit slowly, avoiding sudden
jerky starts and stops
Make sure the load is secure and prop-
erly balanced Note load capacity at
given centers below.
Make sure the stabilizer legs are in-
stalled and locked into position.
4. Reversing the Forks
Disengage 2 spring-loaded pins. Rotate
fork assembly 180 degrees. Engage the 2
spring-loaded pins.
Reverse step #4 to return the forks to their
normal position.
WARNING
Moving the unit with elevated loads
should be contained to short
distances; i.e., 10-15 feet/4-5 meters.
WARNING
Do not extend load centers beyond
fork ends by modifying the lift.
Lift may become unstable.
