7. Using the Stabilizer Legs
The lift will arrive with the stabilizers legs
in the stowed position in the leg storage
pocket. To remove the legs, pull the
plunger ring located on the back of the
storage pocket while lifting up on the leg.
Remove the leg from the storage pocket
and place on the ground next to the corre-
sponding leg mounting socket.
Repeat for each leg.
Note: The two longer legs mount
towards the front of the lift.
Insert each leg into its’ respective mount-
ing socket making sure that the locking
plunger fully engages.
Using the leveling screws, level the lift un-
til the bulls eye bubble level shows that
the unit is level.
All four of the base casters should be off
of the ground when the lift is level.
WARNING
Never operate lift during
high wind conditions.
10
WARNING
Never operate lift if you
cannot level unit.
WARNING
Use of the stabilizer legs is required at
all times when raising loads.
WARNING
When erected on carpeting, place a
plate of solid material beneath each
stabilizer leg to ensure
proper support.
