5
The MAXIS
®
3K is a high-speed cable puller intended to pull
medium to large wire (up to 500MCM) through conduit. It will
operate at both 25 feet per minute in low and 100 feet per minute
in high and requires only one person to set up and operate.
The MAXIS
®
3K is an industrial puller, intended for multiple runs of
200-amp sub panel feeders.
IMPORTANT SAFETY INFORMATION
IDENTIFICATION
6
DESCRIPTION OF OPERATION
1. Conduit Adaptors (8 Sizes-1”to 4”)
2. Adaptor Housing bracket
3. Adaptor bolt 5/8 inch
4. Front Roller
5. Front Extension
6. Main Roller
7. Main Roller Hitch Pin (4-1⁄2 x 1⁄2)
8. Front Extension Hitch pin (4-1⁄2 x 1⁄2)
9. Adjustable Outer Sleeve
10. Clevis Pin
11. Capstan
12. Drill Chuck Adaptor
13. Gear Box
14. Switch Lever (on/off)
15. Drill Mount
16. Lower Fixed Leg
17. Lower Pulley
18. Base Plate
19. Base Plate Pin
20. Drill Mount Bolt
CAUTION:
•
Read and understand all of the instructions and safety information
in this manual before operating or servicing this tool.
CAUTION:
• Do not use if any parts are damaged as this can cause an unsafe
condition and lead to tool malfunction or failure.
• If tool is in disrepair,
DO NOT USE.
Have tool serviced at an
Authorized Southwire Repair Center.
FAILURE TO OBSERVE THESE CAUTIONS COULD RESULT IN
SEVERE INJURY OR DEATH.
FAILURE TO OBSERVE THESE CAUTIONS COULD RESULT IN
INJURY OR DEATH.
• Inspect all aspects of the pull to ensure safety.
• Only qualified personnel should use pulling equipment.
• Do not use the cable puller as hoist or winch. The cable puller
cannot lower a load. The load may fall and cause serious injury
or death.
1
2
3
4
5
8
6
7
10
11
12
15
20
14
19
18
17
16
13
9
