6
Maintenance
5
the following care instructions are performed:
Temperature extremes can shorten the life of the electronic parts and
distort or melt plastic parts.
damage the electronic parts or the case.
damp cloth. DO NOT use chemicals, cleaning solvents, or detergents.
PRODUCT COMPLIANCE
Users of this product are cautioned not to make modifications or changes
that are not approved by Southwire Company, LLC. Doing so may void the
compliance of this product with applicable laws and regulatory require-
ments and may result in the loss of the user’s authority to operate the
equipment.
UNITED STATES AND CANADA
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions; (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
in a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
which the radio or television receiver is connected.
CAUTION: To comply with the limits of the Class B device, pursuant to Part
15 of the FCC Rules, this device is to comply with Class B limits. All peripherals
must be shielded and grounded. Operation with non-certified peripherals or
non-shielded cables is likely to result in interference and reception of the device.
Canadian Digital Apparatus Compliance
EUROPEAN UNION
In accordance with CE requirements, the Declaration of Conformity may be
found at www.southwiretools.com
