8
Step 7: Cage Top Plate Subassembly
•
Slide an 85mm crossmember through the front section of the top plate.
•
Slide an 85mm or 72mm crossmember through the rear section of the
top plate.
•
See rollbar installation steps for identifying which crossmember to use
on rear section of top plate.
Step 8: Cage Top Plate and Crossmember Installation
•
Slide crossmembers into place. No hardware installation at this time.
•
Slide cage top plate subassembly into place.
85mm
Crossmember
85mm or 72mm
Crossmember
(See Rollbar Steps)
Front
Rear
85mm
Crossmember
Summary of Contents for KK3 FULL KIT
Page 1: ......
