Step 17.1:
•
Loosely attach two 78mm crossmembers to one wheelie bar plate using M3 screws.
•
Attach the second wheelie bar plate using M3 screws
Wheelie Bar Instructions
M3x12 Screw
M3x12 Screw
M3 Locknut
Step 17.3:
•
Install two M3 screws into the 78mm crossmember.
•
Install four M3 screws and locknuts into the remaining holes.
•
Tighten all fasteners snug to complete installation,.
M3x12 Screw
Align holes
M3x12 Screw
78 mm Crossmember
78mm Crossmember
M3x12 Screw
Step 17.2:
•
Slide wheelie bar assembly into the chassis and align the holes shown below.
•
Insert 78mm crossmember in place of existing 78mm crossmember.
Summary of Contents for KK3 FULL KIT
Page 1: ......
