Step 16: Swaybar Installation
•
Remove set screw(s) from the swaybar arm, slide in torsion rod with flat
spot oriented towards the set screw(s). Apply blue thread locker to the
set screw(s) and install tight.
•
Slide swaybar and torsion rod through the bushings, and repeat the first
bullet to install the other swaybar arm.
•
Use M3x12 screws to attach swaybar connector rods to the swaybar
arms. Verify connector rod length in provided chart.
•
Use M3x16 screws to attach swaybar connector rods to the dual shock
kits for AR60 and Clod setups.
Set Screw
M3x12
M3x16
*Swaybar image is for
reference only
Torsion Rod
Connector Rod
AR60 Axles
Clod Axles
FreestyleRC Axles
Hole-to-hole Lengths
55.4mm
55.4mm
68mm
Swaybar Arm
Summary of Contents for KK3 FULL KIT
Page 1: ......
