7
INSTALLATION STEPS
FOR EZ MOUNT PANELS
7
8
9
Place spacer over screw and fasten to wall.
Repeat process until all 4 are in position.
!! DO NOT OVER TIGHTEN SCREW
AS MAGNET WILL SHATTER !!
From attic, drill hole for
cable drop through.
Connect your RJ45 Quick connect cable from the ceiling to the
IN
port of your first
first star panel. Take your next RJ45 cable and connect to the
OUT
port and hang
o
ff
to the side for your next panel
NOTE:
Remember to
always connect your
next panel cables to
the proper ports!
OUT to IN.
NOTE:
Using spacers
are optional but
recommended.
NOTE:
Firmly place
RJ45 connector in the
port. Your should feel
a ‘click’ indicating a
secure connection
