background image

Questions? Call Toll Free at 1-800-737-2112 

 

Copyright © 2011 MAT Engine Technologies, LLC

Warranty

• Save all instructions 

Always specify model number when contacting the factory.
We reserve the right to amend these specifications at any time without notice. The only warranty applicable is our standard 

written warranty. We make no other warranty, expressed or implied. 

MAT Engine Technologies, LLC

 warrants this Trimmer 

and any parts thereof, to be free from defects in material and workmanship for one year (90 days for reconditioned unit) from 

the date of first purchase from an authorized dealer, provided that the product has been properly maintained and operated in 

accordance with all applicable instructions. This warranty is extended only to the original retail purchaser. The bill of sales or 

proof of purchase must be presented at the time a claim is made under this warranty. This warranty does not cover commercial, 

industrial, or rental usage, nor does it apply to parts that are not in original condition because of normal wear and tear, or parts 

that  fail  or  become  damaged  as  a  result  of  misuse,  accident,  lack  of  proper  maintenance,  tampering,  or  alteration.  Travel, 

handling, transportation, and incidental costs associated with warranty repairs are not reimbursable under this warranty and 

are the responsibility of the owner. To the full extent allowed by the law of the jurisdiction that governs the sale of the product, 

this express warranty excludes any and all other expressed warranties and limits the duration of any and all implied warranties, 

including warranties of merchantability and fitness for a particular purpose to two years from the date of first purchase, and 

MAT 

Engine Technologies, LLC’s

  liability is hereby limited to the purchase price of the product and 

MAT Engine Technologies, 

LLC

 shall not be liable for any other damages whatsoever including indirect, incidental, or consequential damages. Some states 

do not allow limitation of how long an implied warranty lasts or an exclusion or limitation of incidental or consequential damages, 

so the above limitation of damages may not apply to you. This warranty provides the original purchaser with specific rights. 
For information regarding those rights, please consult the applicable state laws.

METL Corporate Office - CORRESPONDENCE ONLY

ATTN: Technical Service – METL

6700 Wildlife Way

Long Grove, IL  60047

This 

MAT Engine Technologies, LLC (METL)

 outdoor power equipment engine complies with the emissions regulations of:

Southland® Model No.

Regulatory Agency

S-HLT-2515-CB-E

United States Environmental Protection Agency (“U.S. EPA”)

S-HLT-2515-CB

State of California

To the extent there is any conflict between this Emissions Control Warranty and the 

METL

 Limited Warranty, this Emissions Control 

Warranty shall apply except where the 

METL

 Limited Warranty may provide a longer warranty period.

Please read your warranty rights and obligations carefully. Some sections of the warranty may not apply to the specific 

model  you  purchased.  Unless  specifically  noted  otherwise,  the  terms  below  shall  apply  to  all  Southland®  products 

covered within this manual.

YOUR WARRANTY RIGHTS AND OBLIGATIONS

State of California (Applies only to Model No. S-HLT-2515-CB):

The California Air Resources Board and 

MAT Engine Technologies, LLC (METL)

 are pleased to explain the emissions 

control system warranty on your 2010 small off-road engine (SORE). In California, new SOREs must be designed, built 

and equipped to meet the State’s stringent anti-smog standards.

 METL

 must warrant the emissions control system on 

your SOREs for the periods of time listed below provided there has been no abuse, neglect or improper maintenance of 

your SOREs.

 

12 

Southland® TRIMMER Limited Warranty

A

Federal and California Emissions Control Warranty Statement

B

Summary of Contents for S-HLT-2515-CB



















Reviews: