Questions? Call Toll Free at 1-800-737-2112
Copyright © 2011 MAT Engine Technologies, LLC
Safety Definitions
• Save all instructions
Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury
or equipment/damage property.
DANGER
CAUTION
WARNING
The information listed below should be read and understood by the operator. We utilize the symbols below to allow the
reader to recognize important information about their safety.
Safety Alert Symbols:
Indicates Warning.
Keep all by-standers at least 50 ft.
(15 m) away.
Read these instructions carefully.
This equipment can throw small objects
at high speed causing personal injury.
Inspect area where used and remove
all foreign objects.
Always wear eye protection that meets or
exceeds the requirements of ANSI Z87.1.
Wear hearing protection.
Wear breathing protection.
Explosive material.
Wear safety footwear.
Extremely hot surface. Do not touch
a hot muffler, gear box or cylinder,
you may get burned. These parts get
extremely hot from operation and
remain hot for a short time after the
unit is turned off.
Wear safety gloves.
Rotating impeller blades can cause
severe injury.
Safety Warning Symbols:
50 ft
15 m
Control and Operating Symbols:
Choke Control:
Cold Start
Run/Warm Start
Fuel Mixture:
40:1
(Unleaded Gas : 2 Cycle Oil)
Fuel Primer:
Press 6 times.
Ignition Switch:
ON
OFF
1
Important
Safety
Information