The OMD-625 Oxygen Analyzer is a feature packed unit with an easy to use menu interface. The key
attributes within the menu are the ability to select a measurement range - including customizing your
own range (i.e. 0 - 93.5 ppm) or set the analyzer to a single manual range or auto-range mode. To
calibrate the unit with a known gas, also referred to as a SPAN Calibration or SPAN CAL., to perform
a ZERO Calibration (if necessary, most applications it is not required) and to set the alarm relays and
their functionality.
All features are programmable / selectable through the MENU button. The UP / DOWN arrows will
allow you to select your set points and the enter button saves the data. If you want to cancel your
selection, or return to the previous screen the escape key ESC will allow you to do this. Once the
unit starts up, the following HOME Screen will appear:
Operating Range
Current Oxygen Reading
Identifier, Manual
or Auto Range
Alarm 2
Alarm 1
3.1
Understanding The Controls And Their Operation
Operation
OMD-625 Oxygen Analyzer
Designed, Tested and Assembled in California, USA
4045 E. Guasti Rd. #203 Ontario, CA 91761 USA : 1-949-398-2879 : [email protected] : www.sso2.com
