Page 2 of 21
Summary & Introduction
Introduction
The Southern States type EV-2H is a three phase, group operated, vertical break air disconnect
switch. Poles can be mounted in a horizontal “upright”, vertical, or under hung position. The
switch may be operated using a manual operator or electrical motor operator.
The installation procedure for all mounting positions and operating schemes are similar and
explained herein. A system of pipes, bearing, and adjustable length arms are utilized to open
and close the switch from a ground level operator.
The installation procedure for all mounting positions and operating schemes is similar and
explained herein. A system of pipes, bearing, and adjustable length arms is utilized to open and
close the switch from a ground level operator.
The instructions contained within this manual are necessary for the safe installation,
maintenance, and operation of the EV-2H switch. A qualified person, familiar with this of type
equipment, should carefully read and follow the instructions.
These instructions are intended to provide a general guideline for the installation, adjustment,
and maintenance of the EV-2H switch. It is not possible to cover all details, equipment
variations, and potential conditions. Contact Southern States, LLC in the event conditions
associated with a specific application are not sufficiently addressed.
All photographs and sketches in this manual are for illustration purposes only and may not be to
scale. Refer to the Unit Assembly drawing or the Operating Mechanism drawing provided with
each disconnect switch for specific details. During installation, it may be necessary to make
adjustments other than those described in this manual. Contact your local representative or the
factory if questions should arise.
Southern States After Sales and Service Department is available for field installation assistance
along with providing parts support for all Southern States products.
Contact After Sales and Service at 770-946-4562, 7:30am-4:00pm EST Monday-Friday.
After Hours: 770-946-4565
Distinctive signal words are used to indicate the degree of hazard that may be encountered by
the user. Identification of the signal words and their definition follow:
Indicates an imminently hazardous situation, which, if not avoided, will result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result in
death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury. It may also be used to alert against unsafe practices.
