Page 6 of 22
Installation & Adjustment Procedures
Installation & Adjustment Procedures
Recommended Tools & Values
Table 2: Recommended Tools and Torque Values
Recommended Tools
Recommended Torque Values
Type
Sizes
Bolt/Nut size
Torque (Ft-lb)
Hand Wrenches
and/or Sockets
15/16”, 3/4",
5/8”, 9/16”
1/2”
50 (S. Steel)
40 (All Others)
Drill Bit
1/4”
5/8”
92
3/4"
127
1”
286
General Information & Mandatory Pre-Installation
Requirements
All photographs and sketches in this manual are for illustration purposes only and may not be to scale.
Refer to the Unit Assembly drawing or the Operating Mechanism drawing provided with each disconnect
switch for specific details on switch opening direction and handle location(s).
During installation, it may
be necessary to make adjustments other than those described in this manual.
Contact your local
representative or the factory if questions should arise.
Southern States Service Department is available for field installation assistance along with providing
parts support for all Southern States products.
Contact the Service Department at 770-946-4562
.
Summary of Contents for EC-2V
Page 2: ...Page I The Quality Name in High Voltage Switching THIS PAGE LEFT INTENTIONALLY BLANK...
Page 6: ...Page V The Quality Name in High Voltage Switching THIS PAGE LEFT INTENTIONALLY BLANK...
Page 7: ...Page VI The Quality Name in High Voltage Switching Type EC 2V...
Page 31: ...Page 22 of 22 Recommended Inspection Maintenance Comments...