South-Tek Systems N2Blast FPS-1750 Manual Download Page 20

N

2

-BLAST

®

 Nitrogen Generator FPS-1750, FPS-3000, and FPS-6000   

           South-Tek Systems

      

 

Version:

 7 

Revision Date: 5/24/16    

                                                                                                            

Page 20 of 25 

APPENDIX A: WARRANTY 

 

The  N

2

-BLAST

®

  Nitrogen  Generator    System  is  warrantied  against  any  defects  in 

workmanship  and  materials  for  12  months  (or  1000  hours)  from  the  date  of  shipment 
from South-Tek Systems, whichever comes first. The purchaser has the liability to ensure 
that the system is fully inspected upon delivery and shall contact the appropriate shipping 
company  to  make  any  claims  on  damaged  goods  due  to  transit  within  that  shipping 
company’s policies.  If the system is received with defects that are not due to shipping, a 
written claim should be submitted to South-Tek Systems within 1 week of receiving the 
shipment.  South-Tek Systems can deny all other claims at their discretion. 

 

All  warranty  work  shall  be  done  at  a  South-Tek  System  facility  or  at  a  N

2

-BLAST

®

 

Nitrogen  Generator    Authorized  Service  Center.  Only  factory  trained  and  authorized 
personnel  are  covered  under  warranty.  Any  part  that  is  returned  /  repaired  /  replaced 
under  warranty  may  be  remanufactured  or  changed  to  a  different  specification  at  the 
factory’s option.  Any work performed by  an unauthorized person/company or usage of 
non-factory parts, may void all warranties to the product.    

 

Any  item  not  manufactured  by  South-Tek  may  carry  its  own  warranty  from  its 
manufacturer  and  will  be  warrantied  by  that  manufacturer.    All  parts  that  need  to  be 
returned  should  be  announced.    Any  item(s)  that  is  returned  to  South-Tek  Systems 
without  an  RMA  number  (return  authorization  number)  may  be  denied  and  returned  to 
the sender.  Contact the factory for RMA #’s, prior to return shipment. 
 

South-Tek Systems is not liable for damages caused by normal wear and tear, water, fire, 
erosion,  corrosion,  explosion,  misuse,  oil/gas  vapors  or  unauthorized  modifications.  
South-Tek Systems is also not liable for any losses (including CO

2

), damages, or cost of 

delays,  including  incidental  or  consequential  damages.  There  are  no  warranties  or 
guarantees,  expressed  or  implied,  including  the  warranties  of  merchantability  or  fitness 
for a particular purpose or use, other than those warranties expressed herein.   

 

For Claims, contact South-Tek Systems LLC at: 

tel (919) 847-3800    fax (919) 847-0255 

Email: 

[email protected]

 

Or write to: 

South-Tek Systems, Warranty Claims, 4724 Sharpstone Lane, Raleigh, NC 27615 

Summary of Contents for N2Blast FPS-1750


























Reviews: