Inventory
When you are completely satisfied with the
condition of your shipment, you should inventory
the contents.
Inventory (Figure 3)
Qty
A. Cap Screws M10-1.5 x 40mm
(Taper Attachment Mounting) ......................4
B. Taper Attachment Assembly .........................1
C. Tapered Pins 8.7 x 7.7 x 47mm .....................2
D. Copper Anti-Score Plug .................................1
E. Deadman Clamp Assembly ...........................1
F. Deadman Arm and Clevis .............................1
Unpacking
This item was carefully packaged to prevent
damage during transport. If you discover any
damage, please immediately call Customer
Service at (360) 734-1540 for advice. You may
need to file a freight claim, so save the containers
and all packing materials for possible inspection
by the carrier or its agent.
Figure 3. Model SB1269 inventory.
A
B
C
D
E
F
Things You'll Need
This attachment is intended to be a permanent
installation. Installation will take approximately
1.2 hours and require the following items:
For Assembly
•
Cotton Rags
•
Mineral Spirits
• Safety Glasses
•
Oil Can with any Basic Machine Oil
•
Assistant
•
Open End Wrench (17mm)
•
Hex Wrenches (3, 4, 5, 6, and 8mm)
•
Tapered Drill Bit (8mm)
•
Safety Glasses
•
Oil Can with Pressure Tip
•
Dila Indicator with Magnetic Base
•
Phillips Screwdriver, #2
•
Hammer
•
Drill Bit,
19
⁄
64
"
•
Spiral Pin Reamer, Industrial Size: 6
—Small End Diameter: 0.2773"
—Large End Diameter: 0.3540"
For Product Mfg. Since 1/10
Model SB1269
-3-
P R E P A R A T I O N
