South Bend Tools
For Machines Mfd. Since 12/20
Model SB1117
-25-
O P E R A T I O N
5.
Move belt tension lever up and toward
contour drum, as shown in Figure 30.
Figure
Figure 30. Moving belt tension lever to un-tensioned
. Moving belt tension lever to un-tensioned
position.
position.
Belt Tension
Belt Tension
Lever
Lever
!
6.
Remove old sanding belt and replace with
new one, being sure arrows on belt match
arrows of belt rotation on machine (see
Figure 31).
7.
Move belt tension lever down to tension
sanding belt (see Figure 32).
8.
Close belt guard and secure with lock knobs
and washers removed in Step 2.
9.
Belt MUST be pre-tracked before connecting
machine to power. Proceed to Pre-Tracking
Belt on Page 26.
Figure
Figure 32. Sanding belt installed and tensioned.
. Sanding belt installed and tensioned.
Figure
Figure 31. Sanding belt rotation arrow.
. Sanding belt rotation arrow.
Belt Rotation
Belt Rotation
Arrow
Arrow
4.
Loosen dust hood lock handle to open end
table dust hood (see Figure 29).
Figure
Figure 29. Location of dust hood lock handle.
. Location of dust hood lock handle.
Dust Hood
Dust Hood
Lock Handle
Lock Handle
