3.6. Measurement
Warning
Before to use this instrument the User guide and Safety warnings must be read
and understood.
Safety procedures and rules for working near high voltage energized systems
must be observed during the use of this equipment. The generated voltages and
currents may be dangerous.
1. Before power-on the equipment, connect the test probes to the item to
be measured and to the front panel terminals, as shown in figure 2 for
current up to
10 A
or in figure 3, for the
100 A
range.
R
R
fig. 2
fig. 3
The clamps in the drawings are only for illustration.
11
