Version 5.2
Sourcefire 3D System Installation Guide
179
Hardware Specifications
Sourcefire 8000 Series Devices
Chapter 6
The
8000 Series System Components: Rear View
table describes the features
that appear on the rear of the appliance.
The 10/100/1000 management interface is located on the rear of the appliance.
The
8000 Series Management Interface LEDs
table describes the LEDs
associated with the management interface.
8000 Series System Components: Rear View
F
EATURE
D
ESCRIPTION
VGA port
USB 2.0 ports
Allows you to attach a monitor, keyboard, and mouse to
the device, as an alternative to using the RJ45 serial port,
to establish a direct workstation-to-appliance connection.
RJ45 serial port
Allows you to establish a direct workstation-to-appliance
connection (using an RJ45 to DB-9 adapter) for direct
access to all of the management services on the device.
The RJ45 serial port is used for maintenance and
configuration purposes
only
and is not intended to carry
service traffic. See the
8000 Series RJ45 to DB-9 Adapter
10/100/1000
Ethernet
management
interface
Provides for an out-of-band management network
connection. The management interface is used for
maintenance and configuration purposes
only
and is not
intended to carry service traffic.
Redundant
power supplies
Provides power to the device through an AC power
source.
Grounding
locations
Allows you to connect the appliance to the Common
Bonding Network. See the
on page 240for more information.
8000 Series Management Interface LEDs
LED
D
ESCRIPTION
Left (activity)
Indicates activity on the port:
•
A blinking light indicates activity.
•
No light indicates there is no activity.
Right (link)
Indicates whether the link is up:
•
A light indicates the link is up.
•
No light indicates there is no link.