Setup Step
30
20
User Setup -
Service Filter
These setup steps allow the user to monitor equipment runtimes and program
service alerts. Service alerts are displayed in the scrolling marquee.
Runtime hours
or days appear in
the clock display.
Press and hold FAN to clear
service alert messages from
the scrolling marquee.
Press the
SETUP
button, then press
MODE
repeatedly until the desired setup
step appears. Use the
WARMER
or
COOLER
buttons to make selection. Press
MODE
to advance to the next step. Press
SETUP
to leave the setup screens.
Service Filter Runtime
(Setup Steps 9-10, 12-13)
Current Service Filter Runtime Hours (Setup Step 9)
- This counter keeps track
of the number of hours of fan runtime in the Heating mode, Cooling mode,
and in stand alone Fan operation. Press FAN to reset.
Current Service Filter Calendar Days (Setup Step 10) -
This counter displays the
total number of calendar days that have elapsed since the counter was reset to
help the user track Fan runtime. Press FAN to reset.
Set Service Filter Runtime Hours (Setup Step 12) -
This timer allows the user
to specify the number of hours the fan will run before the “Replace Filter”
alert will be displayed. Press
COOLER
continuously until
0
is displayed to
disable this alert.
Set Service Filter Calendar Days (Setup Step 13) -
This timer allows the user
to specify the number of calendar days that will elapse before the “Replace
Filter” alert will be displayed. Press
COOLER
continuously until
0
is displayed
to disable this feature.
MODE
SETUP
FAN ON | AUTO
