Quick Start
7
Selecting your desired temperature
AUTO-CHANGEOVER MODE
- Pressing the WARMER or COOLER but-
tons in Auto mode will adjust both the heat and cool setpoints simul-
taneously. To adjust heat and cool setpoints individually, choose HEAT
mode to adjust the heat setpoint and COOL mode to adjust the cool
setpoint, then return to AUTO mode.
HEAT OR COOL MODE -
Pressing the WARMER or COOLER buttons
in Heat or Cool mode will adjust only the heat or cool setpoints
individually displayed.
Using the Fan Button
Fan On
indicates constant fan operation. Fan On is not allowed
when the thermostat is in the OFF mode. Pressing the FAN button
toggles this feature. If you don’t see “Fan On”, the fan is in auto mode
and will only turn on during a heat or cool demand.
Using the Override Button
Unoccupied Operation —During
programmed, unoccupied
periods, pressing the OVERRIDE button will force the thermostat into Occupied
1 setting for 30 minutes. Each press of the OVERRIDE button will add another
30 minutes of time for up to 4 hours. If the maximum time has been set,
the next press of the OVERRIDE button will reset the timer and return the
thermostat to the correct time period program for the day
Occupied Operation—
During programmed, occupied periods, pressing the
OVERRIDE button will force the thermostat into an unoccupied period for
the rest of the day. During this forced unoccupied period, the OVERRIDE
button will operate as described above.
To adjust the setpoints for the Unoccupied mode, see page 27.
Current Override Hours
(Setup step 10) - This counter keeps track
of the number of hours that the thermostat is overridden into Occupied
settings. Press FAN to reset.
NOTE: Override may only be
used when the thermostat is
set to PROGRAM ON.
Summary of Contents for S1-TBSU304-S
Page 2: ......
