manualshive.com logo in svg

SoundTraxx TSU-2200, User Manual, Page: 73 / 75

Share
Download
SoundTraxx TSU-2200 User Manual Download Page 73

Appendix C: License Agreement 

Tsunami2 Electric User’s Guide 

 

73 

Appendix C: License Agreement 

Please read this license agreement carefully before opening your Tsunami2 Digital Sound 
Decoder packaging. Breaking the seal on the packaging indicates you have accepted the 
license terms detailed herein. If you received the Tsunami2 Digital Sound Decoder pre-installed 
from your dealer, using the product indicates your acceptance of the license terms detailed 
herein. If you do not agree with the terms, return the unopened package to the dealer within 
thirty (30) days to receive a refund of purchase. 
 

SoundTraxx Software License Agreement 

SoundTraxx provides the computer software/firmware embedded within the Tsunami2 Digital 
Sound Decoder and any modifications, updates, revisions or enhancements received by you 
from SoundTraxx or its dealers and licenses its use within the terms set below: 
 
A.  You are granted a nonexclusive, nontransferable license to use the software/firmware 

included with your Tsunami2 sound system only with the Tsunami2 sound system hardware 
that you purchased. 

 
B.  Title and ownership of the software/firmware, sound recordings, documentation and 

accompanying materials, if any, and all associated intellectual property rights remain with 
SoundTraxx. 

 
C.  The structure, organization, and code of the software/firmware are the valuable properties of 

SoundTraxx. You may not make copies of the hardware, software/firmware, code, or any 
portions thereof. You are not to modify, adapt, translate, reverse engineer, de-compile, 
disassemble or create derivative works based on the hardware or software/firmware. 

 
D.  Unauthorized copying of the software/firmware or documentation, or failure to comply with 

the above restrictions, will result in automatic termination of this Agreement. This Agreement 
does not grant you any intellectual property rights. 

 
 

Summary of Contents for TSU-2200












































































Reviews:

No comments