Basic Programming
Tsunami2 Electric User’s Guide
41
b. To select bell 8 with a fast ring rate for the bell function and enable the grade-
crossing bell, enter a value of 159 into CV 122.
4. You can select a different air compressor with CV 124. Entering a value from 0 to 3 into
CV 124 will select air compressors 1-4. To select air compressor 4, enter a value of 3
into CV 124.
5. You can select a different coupler with CV 126. Entering values from 0 to 2 into CV 126
will select the medium, heavy, and link-and-pin couplers. To allow the uncouple sound
effect to be activated when the couple/uncouple function (F13 by default) is turned off,
add a value of 128 to CV 126.
a. A value of 1 will select the heavy coupler and a value of 128 will allow the couple
and uncouple sound effects to be activated with the same function key. To
determine the value of CV 126, add the values together.
1 + 128 = 129
b. To select the heavy coupler and invert the uncouple function polarity, enter a
value of 129 into CV 126.
6. You can adjust the number of coach door slams that occur with the all aboard/coach
doors function (F23 by default) with CV 195. Entering a value from 1 to 15 into CV 195
will set the coach door count from 1 to 15. To simulate eight coach doors, enter a value
of 8 into CV 195.
7. You can adjust the frequency of the poppet valve release with CV 200 to simulate more
arid or humid operating environments. Entering a value from 1 to 255 into CV 200 will
set the poppet valve release from the fastest rate to the slowest rate. Enter a value of
150 into CV 200 to simulate an arid environment.