18
ENGLISH
SPIRE SERIES User manual
10. TROUBLESHOOTING
Problem
Probable cause(s)
Remedy
No response from fixture
when power is applied
No power to fixture
Check power cables
Primary fuse blown
Replace fuse
Secondary fuse blown
Replace fuse
Fixture resets but does not
respond correctly to control-
ler (DMX mode operation)
Controller not connected
Connect controller
Incorrect addressing of the
fixtures
Check address setting on fixture
and controller
Bad data link connection
Inspect cables and correct poor
connections and/or broken cables
Conflict between tracking
and vector control
Eliminate scene cross-fade on
controller
Data link not terminated
Insert termination plug in output
of last fixture
Defective fixture or 2 devices
transmitting on link
Bypass fixtures one at a time until
normal operation is regained: un-
plug both connectors and connect
them directly together
Colors cannot be mixed
Random color mixing is on
Turn off random color mixing
Fixture does not reset cor-
rectly
Electronic or mechanical
failure
Contact service technician
No light, lamp cuts out
intermittently, or burns out
too quickly
Lamp missing or blown
Disconnect fixture and replace
lamp
Fixture or lamp is too hot
Allow fixture to cool. If problem
persists, contact service technician