13
ENGLISH
SPIRE SERIES User manual
3. Power Input connector. Connect here the supplied power cord.
4. Fuse Holder: In case of fuse-burn, unscrew the holder cap and replace the fuse with
same size and type (F5A/250V - 20x5mm).
5. Power On/Off switch.
9. LCD TOUCH-SCREEN OPERATION
At machine power-on, the display first shows software revision numbers (figure below
on the left), then resets all the electrical and mechanical parts (center figure). Once the
start-up procedure is finished and the start bar turns completely blue, the main MENU
appears. It provides six sub-menus (right figure): ADDR, MODE, DISP, TEST, ADVA, and
STAT.
Press the orange keys on the display or use the UP / DOWN keys to navigate the vari-
ous menus and the ENTER key to access the desired one.
9.1. Address Menu
The ADDR menu allows you to set the DMX channel of the machine between 1 and 512.
To change it, touch the display on current value area (figure below on the left); a win-
dow will open with UP / DOWN keys and cursor through which to increase or decrease
the channel number. Use the “ ” key to confirm, or MENU to exit without confirming.